Transform Your Bath Space - Installation Guide For New Shower Units

Request Appointment



The article following next relating to How to Build a Shower Enclosure for Your DIY Bathroom is relatively engaging. Try it and make your own personal final thoughts.


Simple ways to Install a Shower Cubicle on Your Own
An effective shower setup calls for careful preparation and a great deal of work. In many cases, you will certainly require to do 3 types of jobs: mounting walls, setting up the plumbing, and completing walls.

Prep work


Firstly, you should select the type of shower that you want to mount. It is essential to establish whether the picked shower is capable of coping with specific systems and also can regulate a safe level of water through the boiler. Most shower devices nowadays are created to be versatile to different water pressures (such as kept hot water and also cool mains).
It is also vital to take into consideration the water stress as well as the planning of the piping and drainage for the shower

Various Kinds Of Shower Units


  • Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower system can be linked to the bath tap as per your demand, and also the water temperature level can be readjusted via the taps. Push-on mixers are cheap as well as incredibly easy to set up. Nevertheless, although the pipe link is easy, it is conveniently dislodged. Additionally, it is inconvenient to readjust the temperature.

  • Bath/Shower Mixer: The pipe and also spray of this type of shower are integrated with a bathroom mixer tap, and the temperature level can be changed through the bathroom taps. It is a really low-cost option and no added plumbing is included. Nonetheless, the bath/shower mixers also suffer from bothersome temperature control alternatives.

  • Manual Mixer: The tube as well as spray of a manual mixer shower unit belong of the wall device and the hot and cold water supplies are connected to a single shutoff The temperature level and pressure of the water are managed through either one or a variety of knobs (in a lot more pricey showers). Although temperature control is much easier in manual mixer types, they are much more costly than the formerly mentioned mixers. They additionally require extra plumbing of hot and cold supply of water pipelines.

  • Thermostatic Mixer: The hose as well as spray of this shower kind are a part of the wall system and also the hot and cold water supplies are connected to a single shutoff here also. It is total with an integrated stabiliser to self-adjust the water temperature as well as to stop it from becoming as well warm. One of the most significant benefits of a thermostatic mixer shower kind includes practical temperature level control. Nevertheless, it is one of the most costly of the various mixer choices.

  • Power Shower: A power shower is a solitary system containing a powerful electrical pump that can altering both the water stress and temperature level. This type of shower can be fitted if there is water system from a cold water cistern and also a warm water cylinder. A power shower makes the change of both pressure and temperature level easy. On the other hand, it disagrees for water heated up directly by the shower or where the water is provided by a combination boiler under mains stress.

  • Electric Shower: An electrical shower is plumbed right into a keys cold water supply as well as it heats the water electrically. It is necessary to note that for this shower type to be mounted, the mains stress needs to be at least 0.7 kg/sq centimeters (10lb/sq in). The system permits the temperature and stress to be changed through a knob. Versions with temperature stabilisers are better as they remain untouched by other faucets somewhere else in operation within the home. A major disadvantage of electric showers is that the control handle only permits the choice of high temperatures at much less pressure, or reduced temperatures at a better pressure. This is bothersome in the winter when the spray is usually weak and also the mains water is cooler. However, this trouble is tackled in some versions which are available with a winter/summer setup.


  • Approach


    Depending upon the type of shower you desire to install, the shower head need to either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it needs to have a check shutoff.
    Before beginning, it is recommended to note the placements of the shower head and control, as well as to intend the pipe-work included. In addition, the drainage system to eliminate the drainage will require to be intended. Both positions of the cable television path and also the shower button will certainly also need to be thought about if a rapid or electric shower unit is being set up.
    Utilize the instruction guide supplied with the shower system to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is important to remove the water supply. In order to shield the pipelines, they should be given a waterproof covering as well as likewise fitted with isolating valves. The pipes can after that be hidden right into the wall surface and also glued over to neaten the general appearance.
    Fit the base tray, shower head, as well as fittings.
    Link the primary shower control to the pipes that will be supplying the water (This may need a female screw thread adapter).
    Reconnect the water supply and test the pipelines for any kind of leakages, as some might need tightening.
    If you are installing an electrical shower, remember to switch off the electrical power supply before making any electrical links. As soon as these links have been made (there ought to be guidance within the user's manual), the power supply can be switched over back on.

    Changing Water Pressure to Suit Your Shower


    The cold water reservoir can be raised to a better height (in some cases just 150mm (6inches)) by fitting a strong wood support under it - possibly made up of struts and also blockboards. If you select this option, the primary and circulation pipes will certainly likewise need to be increased to meet the brand-new height of the tank.
    Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be linked right into the power supply in order to operate.

    Piping and also Drainage


    It is best to utilize 15mm size supply pipes, and also make the runs to the shower as brief and straight as feasible so as to preserve maximum pressure as well as reduce heat loss. Furthermore, by reducing making use of elbows for pipe corners, you can reduce the resistance in the circulation of the water supply. You can achieve this by bending the pipes instead.

    A Lot Of Usual Mistakes


  • Violating or disregarding regional code constraints.

  • Making use of pipes that are too small.

  • Attaching copper to galvanized without utilizing a brass or dielectric suitable in between both.

  • Not utilizing tape or pipeline substance at threaded joints.

  • Uneven your fixtures when installing them.

  • Not mounting an air space filling up for components.

  • Reducing supply stub outs too short to install the shutoff valves onto after the completed wall is in location.

  • Not appropriately straightening tubes right into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes goes to an angle will certainly trigger a leak.).

  • When turning the water back on in your home, always run the outside pipe valve or flush your bathrooms to bleed dirt as well as air from the lines. This debris can trigger issues in your sink faucets and other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Build a Shower Enclosure for Your DIY Bathroom

    We had been made aware of that editorial on How to Install a Freestand through a friend on our other web blog. Sharing is good. You just don't know, you may very well be doing someone a favor. Thank you so much for taking the time to read it.




    Schedule Appointment


    Leave a Reply

    Your email address will not be published. Required fields are marked *